User's Manual

PROGRAMMING YOUR G4

POWER ON

• Press and hold down Button A to turn on the marker with

eye sensors on.

• When battery voltage is lower than 7.2V, the indicator

light will ash red. When battery voltage is over 7.2V

then the indicator light will ash green.

• When the G4 eye sensors are on the indicator will blink

a slow green light (1 blink/0.5 seconds). The indica-

tor light will remain solid green when paintball is in the

breech.

• To turn the eye sensors off, press and release Button A.

When the G4 eye sensors are off the indicator light will

blink a quick green light (1 blink/0.2 seconds)

POWER OFF

• Press and hold down Button A for 2 seconds before indicator light turns off.

• The marker will shut down automatically after being idle for 20 minutes. The marker will retain the last

adjusted set points whether it shutdown automatically, manually or by removing the battery.

1. POWER

LIGHT WINDOW

BUTTON A

2. TOURNAMENT LOCK

• Dip Switch 1 set to “ON”. Modes cannot be set without

unlocking tournament lock.

• Dip Switch 2 is non functional.

3. CONFIGURATION MODE

• To enter programming mode, marker must rst be turned off and

dip Switch 1 must be set to OFF position.

• Pull and hold down trigger then press Button A for 2 seconds.

Release Button A and then trigger and the indicator light will

ash multiple colors and stop at solid red which indicates

programming mode.

1 2

PROGRAMMING YOUR G4 (CONTINUED)

W W W . D A N G E R O U S P O W E R . C O M

22 23