User's Manual

• Carefully remove the 2 hexagonal screws (3/32”) holding the left panel in place.
• Locate battery harness and attach 9V battery to the connector pad. Do not use force!
• Replace battery in grip frame as shown in illustration.
• Replace grip frame and screws. Do not over tighten screws!
INSTALLING THE BATTERY
• Place the barrel cover over the tip of the barrel and pull the elastic band over the feedneck or back of marker
before attaching paintball loader.
BARREL COVER
WARNING
FOR YOUR SAFETY, ALWAYS HAVE THE BARREL COVER ON WHEN NOT PLAYING.
W W W . D A N G E R O U S P O W E R . C O M
12 13
DVB (DUMP VALVE BOLT)
G3 Spec-R BODY
O-RING
BOLT
CAP
BACK POSITION FORWARD POSITION
G3 Spec-R BOLT SYSTEM