User's Manual
1. The DP G3 Spec-R is NOT A TOY. Treat it with
the same respect and care you would a rearm.
2. Carelessness, misuse, and failure to adhere
to the warning and guidelines printed in this
Owner’s Manual may result in property damage,
injury, or death. User assumes all risks
associated with use of the DP G3 Spec-R.
3. Always ensure that proper safety gear - eyes,
face, ear, and head protection - conforming to
ASTM standard F1776 (USA) or CE (Europe)
are worn at all times when paintballs are within
range.
4. Persons under the age of 18 must have adult
supervision at all times during use of the G3
Spec-R, or any paintball ring device.
5. Observe all local and national laws regarding
rules and regulations.
6. The G3 Spec-R should only be used on a
permitted and regulated paintball eld where
safety rules and guidelines are strictly enforced.
7. Only use compressed air or nitrogen. DO NOT
USE CO2!
8. Only use high quality, .68 caliber paintballs.
9. Never point your G3 Spec-R at an unintended
target.
10. Always treat your G3 Spec-R as if it were
loaded.
11. Keep your G3 Spec-R turned OFF until ready to
use.
12. Always measure the velocity of paintballs from
your G3 Spec-R with a suitable chronograph
device before play.
13. Never look down the barrel or breech area of the
G3 Spec-R without rst ensuring that the marker
is switched to the OFF position, with NO AIR in
the marker.
NOTE- SEE NOTE ON PAGE 3 FOR DIRECTIONS ON
REMOVING RESIDUAL AIR FROM A POWERED ‘OFF”
MARKER.
WARNING
IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES!
14. Never put any body parts or foreign objects into
the breech or feed tube.
15. Always use the supplied barrel cover when your
G3 Spec-R is not in use at the eld. Doing so
will help secure the safety of yourself and those
around you.
16. Never allow pressurized gas to come into
contact with your body. Serious harm, injury, or
death may occur.
17. When not in use, always turn your G3 Spec-R to
the OFF position.
18. Promptly remove any paintballs from your G3
Spec-R when not in use.
19. Always remember to remove residual air from
your G3 Spec-R before attempting maintenance
or service.
20. Always remember to remove residual air from
your G3 Spec-R before storage or
transportation.
NOTE- POWERING ‘ OFF’ THE MARKER WILL NOT
AUTOMATICALLY REMOVE RESIDUAL AIR. TO
SAFELY REMOVE RESIDUAL AIR, PLEASE DO THE
FOLLOWING:
A. Remove loader and paintballs from marker.
B. Turn Eye Sensors to the OFF position.
C. Point marker in a safe direction.
D. Fire marker until all residual gas is removed.
21. Always store your G3 Spec-R in a safe place.
22. Do not discard the Owner’s Manual. In the event
of transfer or resale, this guide must accompany
the marker.
23. When in doubt, ALWAYS seek expert advice
by contacting a reputable airsmith familiar with
paintball markers, or by contacting
DP Engineering’s Customer Service Staff.
WARNING
IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES!
W W W . D A N G E R O U S P O W E R . C O M
02 03