User's Manual

CLEANING AND MAINTENANCE OF OPR
1. Remove all visible debris and dirt with a lightly dampened and clean cotton cloth. Take care not to scratch the
surface of any regulator parts.
2. Lightly apply a small amount of DP-40 lubricant to the tip of a cotton swab. (SEE PIC A)
3. Apply lubricant to the o-ring located on the base of the Regulator Adjustment Screw. (SEE PIC B).
OPERATING PRESSURE REGULATOR (OPR)
DISASSEMBLY AND MAINTENANCE (CONTINUED)
BA
4. Apply lubricant to the o-ring located on the base of the OPR Piston. (SEE PIC C)
5. Apply lubricant to the o-ring located on the stem of OPR Piston. (SEE PIC D)
6. Apply lubricant to the 2 o-rings located on the OPR Top Housing Ring. (SEE PIC E . F)
Be careful not to apply excess pressure, as doing so may damage sensitive parts and/or strip delicate threads.
OPERATING PRESSURE REGULATOR (OPR)
DISASSEMBLY AND MAINTENANCE (CONTINUED)
NOTE
CAREFULLY INSPECT O-RING PRIOR TO APPLYING LUBRICANT. REPLACE IF O-RING APPEARS
WORN, CRACKED, TORN, OR DAMAGED.
C ED F
W W W . D A N G E R O U S P O W E R . C O M
34 35