User's Manual

2. TOURNAMENT LOCK
• DIP switch 1 set to “ON”. Modes cannot be set without
unlocking tournament lock.
• Dip Switch 2 is non functional.
3. CONFIGURATION MODE
• To enter programming mode, marker must rst be turned off and
dip switch 1 must be set to OFF position.
• Pull and hold down trigger then press Button A for 2 seconds.
Release Button A and then trigger and the indicator light will
ash multiple colors and stop at solid red which indicates
programming mode.
PROGRAMMING YOUR G3 Spec-R
POWER ON
• Press and hold down Button A to turn on the marker with
eye sensors on.
• When battery voltage is lower than 7.2V, the indicator
light will ash red. When battery voltage is over 7.2V
then the indicator light will ash green.
• When the G3 Spec R eye sensors are on the indicator
will blink a slow green light (1 blink/0.5 seconds). The
indicator light will remain solid green when paintball is in
the breech.
• To turn the eye sensors off, press and release Button A.
When the G3 Spec R eye sensors are off the indicator
light will blink a quick green light (1 blink/0.2 seconds)
POWER OFF
• Press and hold down Button A for 2 seconds before indicator light turns off.
• The marker will shut down automatically after being idle for 20 minutes. The marker will retain the last
adjusted set points whether it shutdown automatically, manually or by removing the battery.
ON
1 2
ON
1 2
1. POWER
LIGHT WINDOW
BUTTON A
PROGRAMMING YOUR G3 Spec-R (CONTINUED)
W W W . D A N G E R O U S P O W E R . C O M
20 21