User's Manual

• Swing ip lever to the ‘release’ position.

• Attach air tank by carefully screwing it into the threaded portion of the RAPS

ASA. Make sure tank tment is

tight and all the way in.

• Return ip lever of the RAPS

ASA to the ‘close’ position.

• A brief sound of air entering the system is normal. The G3 Spec-R is now pressurized.

ATTACHING AIR TANK TO RAPS

FLIP LEVER ASA

WARNING

NITROGEN OR COMPRESSED AIR TANKS ONLY! NEVER USE CO2.

VELOCITY ADJUSTMENT

WARNING

FAILURE TO FOLLOW REGULATIONS REGARDING MAXIMUM ALLOWABLE VELOCITY, CALCULATED

IN FEET PER SECOND (FPS), MAY RESULT IN DAMAGE OF PAINTBALL MARKER, SERIOUS INJURY OR

DEATH. BE RESPONSIBLE AND ALWAYS USE A CHRONOGRAPH TO DETERMINE ACCURATE VELOC-

ITY BEFORE PLAY. DP ENGINEERING RECOMMENDS THAT THE VELOCITY NEVER EXCEED 300 FPS.

• Locate the (1/4”) allen key wrench included with your G3 Spec-R.

• Adjust screw located at the bottom of the Operating Pressure Regulator (OPR) to increase or decrease

velocity.

• Turn screw counterclockwise to increase velocity.

• Turn screw clockwise to decrease velocity.

W W W . D A N G E R O U S P O W E R . C O M

16 17