User's Manual

W W W . D A N G E R O U S P O W E R . C O M
14 15
CONNECTING MACRO-LINE TO HIGH PRESSURE
REGULATOR AND QUICK RELEASE FLIP LEVER ASA
(RAPS
TM
)
• Pull back the collet section of the macro-line elbow
located on your RAPS
TM
ASA. 
• Keeping the collet back, insert macro-line hose rmly into
the tting and release the collet. Be sure that the hose is
seated all the way into the end of elbow tting.

• Repeat the same process on the macro-line elbow
located on your OPR to connect the RAPS
TM
ASA.
WARNING
IMPROPER FITMENT WILL CAUSE PHYSICAL
INJURY. ALWAYS INSPECT MACRO-LINE HOSE
SEATED ALL THE WAY INTO THE END OF THE
ELBOW.
ATTACHING AIR TANK TO RAPS
TM
FLIP LEVER ASA
• Swing ip lever to the ‘release’ position. 
• Attach air tank by carefully screwing it into the threaded
portion of the RAPS
TM
ASA. Make sure tank tment is
tight and all the way in. 
• Return ip lever of the RAPS
TM
ASA to the ‘close’ position.

• A brief sound of air entering the system is normal. The FX
is now pressurized. 
WARNING
ALWAYS USE THE SUPPLIED BARREL COVER
BEFORE AIR UP YOUR FX WHEN IT IS NOT IN
USE AT THE FIELD. DOING SO WILL HELP
SECURE THE SAFETY OF YOURSELF AND
THOSE AROUND YOU. 
D
C
B
E
C
B
A
A