User's Manual

W W W . D A N G E R O U S P O W E R . C O M

12 13

EVERYTHING YOU NEED TO GET STARTED

Prepare the following items in order to begin using your FX:

• One 9V battery. Be sure that the battery is fresh and from a reputable manufacturer.

• Paintball loading device. (Recommended minimum load rate of 25 BPS)

• .68 caliber paintballs. Always use fresh, high-quality paint with proper bore size for best results.

• Approved air tank utilizing COMPRESSED AIR or NITROGEN ONLY.

INSTALLING THE BATTERY

• Carefully remove the 2 hexagonal screws (3/32”) holding

the left panel in place.

• Locate battery harness and attach 9V battery to the

connector pad. Do not use force!

• Replace battery in grip frame as shown in illustration A.

• Replace grip frame and screws. Do not over tighten

screws!

ATTACHING A PAINTBALL LOADER

• Release clamp on feedneck. 

• Loosen thumbscrew counterclockwise by hand.



• Insert feed tube of loader unit.

• Close clamp securely. Loader should t snug within

feedneck. 

• If loader is loose, remove and adjust thumbscrew

clockwise.

WARNING

EXCESSIVE FORCE MAY CAUSE DAMAGE TO

LOADER OR THE FX!

WARNING

THE FX USE NITROGEN OR COMPRESS AIR ONLY, DO NOT USE CO2.