User's Manual

W W W . D A N G E R O U S P O W E R . C O M
60
RAPS™ FLIP LEVER ASA
REMOVAL AND MAINTENANCE (CONTINUED)
11. Use a lightly dampened cloth and/or cotton swab to
remove debris or grime from all RAPS
TM
ASA
components, including the piston, spring, lever, and
casing.
12. Clean and inspect o-ring located on the base of the
piston. Replace o-ring if it appears worn, cracked, or
damaged. Using a cotton swab, apply a small amount of
DP-40 lubricant on the o-ring. 
13. Make sure the spring is properly seated on the piston,
then reassemble the RAPS
TM
ASA in the reverse order of
assembly. 
WARNING
REMEMBER TO DE-GAS THE FX BEFORE
SERVICING THE RAPS
TM
ASA. FOLLOW
INSTRUCTIONS PREVIOUSLY OUTLINED ON
PAGE 40 TO SAFELY AND PROPERLY REMOVE
EXCESS AIR FROM THE MARKER.
H
J
I