User's Manual

W W W . D A N G E R O U S P O W E R . C O M
36 37
FIRING SETPOINTS (CONTINUED)

This option allows you to cap the ring rate at the BPS ‘EYES ON’
setpoint. If you wish to re your marker uncapped at its highest
mechanical rate of re, you can turn the option OFF.

This sets the ‘EYES ON’ rate of re in BPS (balls per second) for all
ring modes.

This adds a fractional BPS to the BPS ‘EYES ON’ setting. For
example, a value of 1 would add .1 to the BPS ‘EYES ON’ rate of
re.

This sets the ‘EYES OFF’ rate of re in BPS (balls per second) for
all ring modes.

This value sets the number of rounds red for each trigger pull in
Burst Mode.

This value sets the number of rounds red for each trigger pull and
release in Reactive Mode.

FIRING SETPOINTS (CONTINUED)

Denes the number of semi shots required before any ramping is
allowed.

This is the trigger pull rate (trigger pulls per second) that needs to
be achieved before ramping. Any semi shots dened must rst be
satised prior to ramping by pull rate. Likewise, if this setpoint is
zero, the marker will ramp immediately after the dened number of
semi shots are satised.

Determines which ring mode to ramp to: Burst, Reactive, Full Auto,
or Percent ramping.

This value is associated with the Ramp Mode. In Burst Mode, it is
the number of shots in a burst. In Reactive Mode, it is the number
of shots red with each trigger pull and release. In Percent ramping,
it is the percentage of ramping used (Ramp Firing Value x 100).

Determines the amount of time the trigger can be at rest and still
remain in the current ramping stage before reverting back to Semi
Mode. This time value is entered in seconds.
