User's Manual
W W W . D A N G E R O U S P O W E R . C O M
34 35
MARKER SETPOINTS (CONTINUED)
This setting allows you to set the amount of time the trigger can
remain idle before adding the Bolt Stick Dwell setting. This value is
ignored if the Bolt Stick Dwell is zero.
This setpoint establishes the amount of time (in milliseconds)
between the eyes sensing the ball in the breech and activation
of the bolt. This ensures a ball has dropped fully into the breech
before the marker res.
This setpoint establishes the amount of time (in milliseconds) after
ring a round that the marker waits to see the bolt transition back
past the eyes. This value can be lowered when using high
performance aftermarket bolts or when a proper tuning procedure is
performed.
Allows you to adjust if or when your marker will automatically
POWER OFF after no ring activity. Auto Shutoff values range from
0 to 60, with each increment adding 1 minute of time to the delay (1
to 60 min.). A value of 0 defeats the Auto Shutoff feature, and your
marker will remain on until you manually POWER OFF.
Allows you to change the intensity level of your OLED display.
FIRING SETPOINTS
Determines what mode will be used for tournament play when the
Tourney Mode Lock Switch is ON. Activate the Tournament Mode by
placing the switch in the ‘ON’ position and power cycling the marker.
Tournament Mode deactivates all programming operations.
To access this switch, remove grip from the grip frame using
supplied allen key wrench (3/32”). In OLED display back side, you
will see a small tiny switch. By default, the switch will be in the ‘OFF’
position (to the right), Shown in illustration. To turn the switch to the
‘ON’ position, carefully nudge the switch using a small sharp object
towards the dot (on the left).