User's Manual

W W W . D A N G E R O U S P O W E R . C O M
30 31
GLOBAL SETUP MENU (CONTINUED)

This setpoint turns on/off the Breakout Mode operation.

Enable the Breakout Mode to choose which trigger pull will activate
this mode.

While the Breakout Mode is active, this setpoint lets you add
additional balls per second to your programmed rate of re.

This sets the mode the marker will re in once Breakout Mode is
activated.

This setpoint lets you choose how the Breakout Mode will end.
Choose 0 to end the Breakout Mode operation once the trigger
is idle 0.2 seconds, or choose the length of time (in seconds) the
Breakout Mode will remain active.
GLOBAL SETUP MENU (CONTINUED)

When this is set to ON, the Breakout function will have to be
re-enabled via the programming menu or through the Hot Start
option. If Auto Clear is set to OFF, simply power cycle your marker
to re-enable the Breakout mode.
3.Tourney Rules
The FX provides fully programmable tournament operations,
allowing you to stay compliant in the event of any future tournament
rule changes. Default support is provided for PSP, NXL and
Millennium tournament formats. The user can also recongure these
rules for other tournament formats or any new tournament format that
is adopted in the future.

Denes the number of semi shots required before any ramping is
allowed.

This is the trigger pull rate (trigger pulls per second) that needs to
be achieved before ramping. Any semi shots dened must rst
be satised prior to ramping by pull rate. If this setpoint is zero,
the marker will ramp immediately after the dened number of
semishots are satised.
