User's Manual
W W W . D A N G E R O U S P O W E R . C O M
26 27
START MENU (CONTINUED)
Program Menu
This menu provides access to all the marker set-points. Each time the
marker is programmed, the settings are stored into a unique prole.
You can program up to six individual proles. From this menu you
can also access the Global Set-points (those that apply to all marker
operations), the Tuning Assist function and the Reset Menu.
Trigger Trainer Mode (TTM)
This option puts you into “training” mode that lets you measure how
fast you can pull the trigger. This mode will capture your Average
and Peak pull rates, and display a bar graph based on your current
pull rate. To start a training cycle, pull the trigger repeatedly for a
short burst. When you stop pulling, the marker will update the OLED
display with your pull rate data. Pull another trigger burst to measure
your rate again.
START MENU (CONTINUED)
Statistics
This option displays the following statistical information about your
marker:
This displays the highest pull rate achieved since the last reset.
This displays the total number of trigger pulls since the last reset.
This displays the total number of bolt cycles / shots red since the
last reset.
All of these statistical counters can be reset to zero from the “Reset Menu”.