User's Manual
W W W . D A N G E R O U S P O W E R . C O M
24 25
START MENU
Prole Load Menu
This option lets you load a prole. You can dene up to six individual
proles. Each prole stores a complete collection of setpoints and
allows instant reconguration of settings and preferences.
Hot Start Menu
This option lets you quickly access the following options:
Instantly uncaps the rate of re on your marker.
Instantly turns on the currently dened Breakout Mode.
Instantly bypasses all eye processing on your marker and res at
the ‘EYES ON’ rate of re.
PROGRAMMING YOUR FX
Please refer to FX Circuit Board Programming Flow-Chart for a complete overview.
To enter Programming Mode, POWER ON the FX while pulling the trigger down. Release the power button and
trigger to continue.
To exit Programming Mode, either POWER OFF the FX or scroll through modes until the ‘x’ appears in the upper
right corner of the screen. When the ‘x’ is displayed, pull and hold the trigger to return to live ring mode.
MENU NAVIGATION
Pull and release the trigger to scroll through the available menu options. An arrow on the left side of the display will
indicate your current selection. To select a menu option, simply pull and hold the trigger. To adjust the setpoint,
tap the Power Button to increase the value or tap the Eye Button to decrease the value. Once the desired setpoint
value is reached, simply scroll to another setpoint, or exit. Once you scroll past the last option in a menu, a “Back
Arrow” icon will appear in the upper left corner of the OLED display. When selected, the “Back Arrow” option
returns you to the previous menu.
NOTE
YOUR MARKER WILL NOT START IN PROGRAMMING MODE IF THE TOURNEY MODE LOCK SWITCH
(SEE PAGE 35) IS IN THE ‘ON’ POSITION.