User's Manual

W W W . D A N G E R O U S P O W E R . C O M

TRIGGER ADJUSTMENT (CONTINUED)

• Screw C (3/32”) adjusts the strength of the trigger’s return

to rest by either reducing or increasing the magnetic pull.

Turning this screw counterclockwise will decrease the

strength. Turning this screw clockwise will increase the

strength. Do not turn the screw too far - doing so may

weaken the magnetic pull and prevent the trigger from

being able to fully return to rest. 

• FX’s SWITCHBLADE™ Trigger. This revolutionary trigger system allows the user to quickly switch

between two trigger styles without the use of tools or disassembly. Simply ip the trigger and lock in place

the desired trigger style. 

CBA