User's Manual

W W W . D A N G E R O U S P O W E R . C O M
16 17
SWITCHING YOUR FX ON/OFF
• Press and hold the Power Button until the FX turns on. Release the power button to continue.
• To power OFF your FX, press and hold the Power Button until your marker shuts off.
TURNING EYES ON/OFF
• The FX use a break beam eyes sensor system to
detect paintball in the ring position. When the eye
sensors are turn on, the circuit board will inhibit
the ring of the bolt when no paintball has detected.
This prevents unintended paintball break age
in the breech of the marker. For optimum results
during play, always leave the eyes in the ‘ON’ position.
When ‘DRY FIRING’, it will be necessary to switch
the eye sensors to the ‘OFF’ position.
• Tap the Eye Button to toggle the eye function
between ON or OFF. Your marker will display
the ‘EYES ON’ icon on the OLED display
when enabled and will re at the ‘EYES ON’ rate of re.
• When the eye function is disabled, the ‘EYES OFF’ icon will appear on the OLED display and your marker
will re at the ‘EYES OFF’ rate of re.
FIRING YOUR FX
• While the FX is ON, tap the Power Button to scroll thru all the enabled ring modes.
• Select desired ring mode.
• Depress the trigger to re the FX.
• The entire ring operation can be programmed electronically for optimal results.




POWER
EYES