User's Manual

26
43. BLUETOOTH REMOTE CONTROL SETUP FOR iPHONE (iPAD IS ALL IN ONE SCREEN, BUT IDENTICAL FUNCTIONALITY)
Open d-box
+
app and
select
scan & select d-box
+
.
Select
start scanning & d-box
+
will appear under devices.
Select the d-box
+
and tap
connect selected.
Both
bluetooth icons should
turn from red to blue.
44. BLUETOOTH REMOTE VOLUME & DIM
Feature: Control the
volume, dim and talkback from this page.
Benefit: Adjust the level to your studio monitors and/or press dim for a user selectable level (Both controlled from the front of
the d-box
+
as well.)
Operation: To customize the
dim level, navigate to the more page and select . You will note the dim button
is blinking. Now select your dim setting by turning the knob. The farther you turn up the green LEDs, the greater
the amount of dim that will be applied. In other words, more green, less level- it acts as a cut. This is relative to the
monitoring level, it is not fixed. For example, if your listening volume is at 12:00 and 2:00 your dim level will also change
and follow these levels accordingly. To commit, press the dim button. The LED will turn off. To exit setup mode, press
either the usb or aes/spdif setup button in the ctrl room section.
Tip: , The app will automatically connect to any d-box
+
in the area- follow these instructions only if the app is not already
connected or you have multiple d-box
+
units.