User's Manual

24
37. TALKBACK AND DIM PAIRING
Tip:
, When engaging the talkback switch, dim is automatically engaged; generally used to keep from blasting the control room
speakers into your
talkback feed and looking like a tubhead in front of your clients. If you’re smart enough to know why
you should override this follow these instructions.
Benefit: To override talkback and dim pairing, first enter setup mode. (See setup mode section.) Then, press and hold the talkback
button until it turns from bright to dim. talkback and dim are now unlinked. To restore the link, enter setup mode and hold
the
talkback button until it goes from dim to bright.
38. DIM LEVEL SETTING
Operation: To customize the dim level, enter setup mode by pressing and holding the usb and aes/spdif setup buttons simultaneously
in the ctrl room section. Press and hold the knob. The small amber LED beneath the knob will begin blinking slowly.
Now select your dim setting by turning the knob. The farther you turn up the green LEDs, the greater the amount of
dim that will be applied. In other words, more green, less level- it acts as a cut. This is relative to the monitoring level, it
is not fixed. For example, if your listening volume is at 12:00 and your dim level is set to 9:00, upon engaging dim, the
volume will drop to 9:00. If you move your listening level to 3:00 and engage dim, the volume will drop to 12:00. (dim is
relative to the regular monitoring level). To commit, press the volume knob again. If you would like to exit press either
the usb or aes/spdif setup button in the ctrl room section. It is now inactive on both the unit and your device.
39. REFERENCE LEVEL SETTING
Operation: This function defaults to off. To turn it on, enter setup mode by pressing and holding the usb and aes/spdif setup buttons
simultaneously in the ctrl room section. Next, hold down the mono 7-8 button until it lights bright amber. It is now
active on both the physical unit and your virtual device. On the d-box
+
, push the volume knob twice, quickly. Now the
small amber LED beneath the knob will flash rapidly. Select your custom reference level. To commit, press the volume
knob in once. To exit, press either the usb or aes/spdif setup button in the ctrl room section. To disable the set monitor
reference level functionality, simply go into setup mode by pressing and holding the usb and aes/spdif setup buttons
simultaneously in the ctrl room section. Next, hold down the mono 7-8 button until the button goes dim (like my X). To
commit, press the volume knob again and to exit setup mode, press either the usb or aes/spdif setup button in the ctrl
room section. It is now inactive on both the unit and your device.
Tip: , If you want to set the reference level based on content coming from a specific input, select that input first, before entering
setup mode. Now you may listen as you adjust.
40. FACTORY RESET
Feature: Reset your
d-box
+
to its factory default settings.
Benefit: Your toddler managed to program your d-box
+
into some pretzel like settings? Simply return it to the factory default.
Operation: Enter setup mode. (See setup mode section.) Then press and hold the line out button until you see the lights of Las Vegas
and hear the relays clicking like church bells. (Identical operation from the free remote app as well.)
Remote Operation
41. COMPATIBILITY & INSTALLATION (as of printing)
iPhone: iOS v10.2 through current 13.X available via the Apple App Store
Mac: macOS v10.8.6 through current 10.15 downloadable from www.dangerousmusic.com
Android: Available via Google Play - min v5.0 through current 10.0
Windows: 7, 8, 10 downloadable from www.dangerousmusic.com