User's Manual

artist. Or simply overwhelm your clients with sound, by latching up to three sets of monitors and playing them at the

same time.

Operation: Enter setup mode. (See setup mode section.) Then in the speakers section press the (1) button once. The LED will light

up green. Now press either the usb or aes/spdif setup buttons in the ctrl room section to exit setup mode. To return to

individual mode, simply repeat the process and turn off the (1) button LED. (Identical operation from the free remote app

as well.)

35. SPEAKER SELECT CONTINUED (SUB PAIRING)

Feature:

sub pairing when choosing a set of monitors, the third monitor output may be dedicated to a subwoofer instead.

Beneﬁt: Link a sub to your monitors, so every time you select them the subwoofer is activated (i.e. press speaker 2 and the sub

button turns on). Or choose to keep it independent for low frequency content checks. (This defaults to independent.)

Tip: , Remember to utilize momentoggle. It is programmed into all of these switches. (Refer to section 3).

Operation: To activate sub pairing, enter setup mode. (See setup mode section.) Then in the speakers section check to ensure that

the (1) button is unlit. You are now set to individual mode. Next, press and hold the desired speaker (1) or (2) until it

blinks quickly. Then light up the speaker 3/sub button. (The sub may be assigned to (1) or (2) or both.) The pairing may

be conﬁrmed by pressing the speaker button again. It will remain in setup mode. Exit setup mode by pressing either the

usb or aes/spdif setup buttons in the ctrl room section to exit setup mode. It will now track with the speaker. (Identical

operation from the free remote app as well.)

36. MONO PAIRING

Feature: When choosing a set of monitors, the mono button has three possible behaviors:

[A] individual mode select and audition one set of monitors at a time. In other words if you have the mono button

engaged and move from speaker 1 to speaker 2 or 3, the mono button will stay lit until you deselect it. (This is the default

setup.)

[B] additive mode select and audition multiple monitors simultaneously. In other words, latch any set of monitors

together and the mono button may be engaged or disengaged at will with any combination.

[C] pairing mode ties the mono and/or sub button to your monitors, so every time you select them mono and/or sub is

activated. (For example, if you have a single monitor like an Auratone.) Press speaker 2 and the mono button turns on

automatically. Press speaker 1 and the mono button turns off automatically. In this scenario, it can still be engaged for

speaker 1, but it won’t remember to follow speaker 1 until you program it.

Operation: To activate pairing mono ﬁrst enter setup mode. (See setup mode section.) Then in the speakers section check to ensure

that the (1) button is dimly lit. You are currently set to individual mode. Next, press and hold the desired speaker (1) or

(2) until it blinks quickly. Then light up the mono button. Exit setup mode by pressing either the usb or aes/spdif setup

buttons in the ctrl room section to exit setup mode. mono will now track with the speaker. (Identical operation from the

free remote app as well.)

“Extremely well set up and unreal how many features

are packed in to so little room! e app is absolutely

crazy, makes this an essential upgrade from the

original D-BOX !”

ALJOSCHA MALLMANN

Producer, Tresorfabrik Studio, Germany