Specifications

D-BOX | 11
Benefit: Hear your mix BEFORE it hits external processing or A/D conversion.
Operation: Utilize the sum switch to select this monitoring source.
Tip: , Use high quality analog quad cable with a spiral shield. (Example M2).
15 & 16. MAIN & ALTERNATE SPEAKER OUTPUTS
Feature: These jacks allow connection with two pairs of studio monitors.
Benefit: Every studio should have at least two points of reference. Not all switchers are equal! The D-Box
achieves this noiselessly, without dropouts or phase shift. Remember... every decision you make
while tracking and mixing is affected by your monitor management system. It is the only piece of
gear that is ALWAYS on while in the studio.
Operation: alt spkr switch (3) allows the engineer to switch between two sets of monitors.
Tip: , Make certain to utilize high quality analog quad cable with a spiral shield. (Example M2). Also
level match the monitors, so one is not louder, since humans are often fooled by the “louder is
better” illusion. These adjustments would be made on the monitors themselves.
EXAMPLE M3:
ANALOG SNAKE
[ANALOG DB25-XLR(F)]
EXAMPLE M1:
AES CABLE
[AES XLR(F)-XLR(M)]
EXAMPLE M4:
AES to S/ PD IF CABLE
[DIGITAL XLR(M)-RCA]
EXAMPLE M2:
MIC CABLE
[ANALOG XLR(F)-XLR(M)]