Service manual

8.4.11 Capacitor Bank
1. Remove 4 screws (T20) from each of the
capacitors.
2. Remove the capacitors.
Reinstall in the reverse order.
130BC081.11
1
Illustration 8.34 Capacitors
1 Capacitors
Table 8.34
8.4.12
DC Coil
1. Remove 5 screws (T20) on the potted coil.
2. Remove the DC coil.
Reinstall in the reverse order.
1
2
130BC082.11
Illustration 8.35 DC Coil
1 Bus bar
2 DC coil
Table 8.35
I-Frame Size Disassembly an...
VLT
®
HVAC Basic Drive Service Manual
94 MG90X202 - VLT
®
is a registered Danfoss trademark
88