Service manual

1
2
3
4
5
130BC059.11
Illustration 8.24 Control Card Mounting Plate
1
LCP and cradle
2 Control card and mounting plate
3 EMC shield
Table 8.24
8.4.2
Power Card
1. Unplug and remove the LCP ribbon cable.
2. Unplug all other cables from the power card.
3. Remove 3 screws (T20) on the power card.
4. Remove the power card.
Reinstall in the reverse order.
130BC070.11
1
Illustration 8.25
1 Power card
Table 8.25
I-Frame Size Disassembly an...
VLT
®
HVAC Basic Drive Service Manual
MG90X202 - VLT
®
is a registered Danfoss trademark 89
8 8