Service manual

8.3.13 DC Coil

1. Remove 5 screws (T20) on the potted coil.

2. Remove the DC coil.

Reinstall in the reverse order.

130BC082.11

Illustration 8.21 DC Coil

1 Bus bar

2 DC coil

Table 8.21

8.3.14

IGBT

1. Remove 2 screws (T20) from each of the 3 IGBTs.

CAUTION

The IGBTs and the heatsink have thermal paste on them.

Wear protective gloves as the paste is poisonous.

2. Remove all IGBTs.

Reinstall in the reverse order.

130BC083.11

Illustration 8.22 IGBT

1 IGBT

Table 8.22

I-Frame Size Disassembly an...

VLT

HVAC Basic Drive Service Manual

MG90X202 - VLT

is a registered Danfoss trademark 87

8 8