Service manual

8.3.3 Power Card Mounting Plate
1. Remove 4 screws (T20) from the power card
mounting plate.
2. Remove the power card mounting plate with the
fan attached.
Reinstall in the reverse order.
130BC071.11
1
Illustration 8.11
1 Power card mounting plate
Table 8.11
8.3.4
Inrush Card
1. Unplug all cables.
2. Remove 6 screws (T20) from the inrush card.
3. Remove the inrush card.
Reinstall in the reverse order.
130BC072.11
1
Illustration 8.12
1 Inrush card
Table 8.12
I-Frame Size Disassembly an...
VLT
®
HVAC Basic Drive Service Manual
82 MG90X202 - VLT
®
is a registered Danfoss trademark
88