Service manual

8.2.8 RFI Filter
1. Remove 2 screws (T20) from the filter.
2. Lift out the filter.
Reinstall in the reverse order.
130BC066.11
1
Illustration 8.8
1 RFI filter
Table 8.8
8.3
I7 Frame Size Disassembly and
Assembly Instructions
8.3.1 Control Card and Control Card
Mounting Plate
1. Remove 2 screws (T20) from the 2 cover plates.
2. Remove the LCP cradle.
3. Remove 3 screws (T10) from the control card.
4. Remove the control card.
5. Remove 2 screws (T20) from the bracket next to
the control card mounting plate.
6. Remove 4 screws (T20) to remove the control
card mounting plate.
7. Unplug the LCP ribbon cable.
8. Remove the control card mounting plate.
Reinstall in the reverse order.
I-Frame Size Disassembly an...
VLT
®
HVAC Basic Drive Service Manual
80 MG90X202 - VLT
®
is a registered Danfoss trademark
88