Service manual

8.2.6 Power Card
1. Remove 7 screws (T20)
2. Remove 5 screws (T10) on the Power Card.
3. Lift out the power card.
Reinstall in the reverse order.
130BC063.11
1
Illustration 8.6 Power Card
1 Power card
Table 8.6
8.2.7
DC Coil
1. Remove 4 screws (T20) from the coil.
2. Lift the coil.
Reinstall in the reverse order.
1
130BC065.11
Illustration 8.7
1 DC coil
Table 8.7
I-Frame Size Disassembly an...
VLT
®
HVAC Basic Drive Service Manual
MG90X202 - VLT
®
is a registered Danfoss trademark 79
8 8