Service manual

7.4.8 Heatsink Fan Assembly
1. Remove the 4 screws (T20) from the fan cover
plate.
2. Press the fan cover plate outwards using a
screwdriver.
3. Remove the fans and the fan cover plate.
Reinstall in the reverse order.
130BC132.11
1
2
Illustration 7.13 Heatsink Fan Assembly
1 Fan cover
2 Fan assembly
Table 7.13
7.4.9
DC Coil
1. Remove the 4 screws (T20) from the DC coil
cover plate.
2. Remove the 4 screws (T20) from the heatsink.
3. Remove the heatsink.
4. Remove 4 screws (T20) from each of the 2 DC
Coils.
5. Remove the coils.
Reinstall in the reverse order.
1
2
3
130BC133.12
Illustration 7.14 DC Coil
1 DC coil cover plate
2 Heatsink
3 DC coil
Table 7.14
H-Frame Size Disassembly a...
VLT
®
HVAC Basic Drive Service Manual
MG90X202 - VLT
®
is a registered Danfoss trademark 65
7 7