Service manual

7.4 H7 Frame Size Disassembly and
Assembly Instructions
7.4.1 Control Card and Control Card
Mounting Plate
1. Remove the LCP by pressing the barbs on the
side.
2. Remove the foil.
3. Remove the 3 screws (T10).
4. Gently, lift off the control card.
5. Press the barb on the LCP ribbon cable and pull
it out of the control card mounting plate.
6. Remove the mounting plate.
Reinstall in the reverse order.
130BC108.11
1
2
3
4
Illustration 7.7 Control Card and Control Card Mounting Plate
1
LCP
2 Cradle
3 Control card
4 Control card mounting plate
Table 7.7
H-Frame Size Disassembly a...
VLT
®
HVAC Basic Drive Service Manual
MG90X202 - VLT
®
is a registered Danfoss trademark 61
7 7