Operating instructions

VLT
®
5000 FLUX
■ Technical functions
■ Introduction
The purpose of Technical function parameters is reading out technical status and conditions of the drive. The
selection of read outs of warnings and alarms is also included in this parameter group.
PNU Parameter Factory setting Range Changes 4-Setup Conversion Data
# description during operation index ype
600 O
Operating data: Operating hours
No No 74 7
601 O
Operating data: Hours run
No No 74 7
602 O
Operating data: kWh counter
No No 1 7
603 O
Operating data: Number of power-up
’
s
No No 0 6
604 O
Operating data: Number of overtemperatures
No No 0 6
605 O
Operating data: Number of overvoltages
No No 0 6
606 D
Data log: Digital input
No No 0 5
607 D
Data log: Bus commands
No No 0 6
608 D
Data log: Bus status word
No No 0 6
609 D
Data log: Reference
No No -1 3
611 D
Data log: Motor frequency
No No -1 3
612 D
Data log: Motor voltage
No No -1 6
613 D
Data log: Motor current
No No -2 3
614 D
Data log: DC link voltage
No No 0 6
615 F
Fault log: Error code
No No 0 5
616 F
Fault log: Time
No No -1 7
617 F
Fault log: Value
No No 0 3
618 R
Reset of kWh counter
No reset Yes No 0 5
619 R
Reset of hours-run counter
No reset Yes No 0 5
620 O
Operating mode Normal function
Normal function No No 0 5
621 N
Nameplate: VLT type
No No 0 9
622 N
Nameplate: Power section
No No 0 9
623 N
Nameplate: VLT ordering number
No No 0 9
624 N
Nameplate: Software version no.
No No 0 9
625 N
Nameplate: LCP identification no.
No No 0 9
626 N
Nameplate: Database identification no.
No No -2 9
627 N
Nameplate: Power section identification no.
No No 0 9
628 N
Nameplate: Application option type
No No 0 9
629 N
Nameplate: Application option ordering no.
No No 0 9
630 N
Nameplate: Communication option type
No No 0 9
631 N
Nameplate: Communication option ordering no.
No No 0 9
639 F
Flash Test
Off Yes No 0 5
See also Operation and Display for further
information regarding Changes during operation,
4-Setup and Conversion index.
✭
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.55.A7.02 - VLT is a registered Danfoss trademark
116