User manual

Note:
In case the username or password is forgotten, the current username and password can be
reset via the display. This is done via [Setup → Reset password] on the display of the inver-
ter. If the password is reset via the display of the master inverter, the password will auto-
matically be reset for every inverter belonging to this master.
6.12.2.
Users
[0] [Plant]
Via this menu, the administrator can assign access for up to 10 different users. A user can ac-
cess different groups of inverters or individual inverters. Which inverters or groups the particu-
lar user will have access to is configured in the Profiles menu. In the section Supported Charac-
ters , a list of allowed characters can be found.
Illustration 6.33: Users
Change the user name and password by clicking on the particular user in the list as shown in
the illustration.
6.12.3.
Profiles
[0] [Plant]
The administrator selects which inverters/groups the user in question will have access to.
Illustration 6.34: Profiles
6. Setup
L00410583-01_02 55
6