User manual

Note:

It is only possible to replicate the settings of the master inverter to the other inverters in the

network.

6.11.2.

Settings Backup

[1] [Inverter]

When settings are changed, the inverter backs up its production log, and updates settings stor-

ed in the display unit.

Stored data are::

• Timestamp

• Setup details

- Language

- Country

- PV Configuration

• Energy production log

• Irradiation log

• Communication setup

- RS485 network address

- IP configuration

- IP address

• Inverter details

- Inverter name

- Group name

- Inverter type

• Messaging

• Logging interval

• Data warehouse service

• GPRS communication setup

• Sensor calibration values

• Environmental settings (settings for revenue and CO

emission)

• PV array settings

Via the Web Server software these settings can be dumped to a file and saved locally on a PC.

Afterwards the file can be loaded to another inverter.

Upload and set the backup file before the inverter has commenced energy production. This en-

sures the settings are used before being superseded.

6. Setup

L00410583-01_02 53