User manual

• DW upload
• Performance ratio (PR)
• Communication error (Com Error)
• Data overwrite
• Plant status
Each message type can be enabled or disabled individually. All message types are disabled as
default.
6.7.1.
Recipient
[0] [Plant]
To use the TripleLynx CN Pro messaging functionality, define at least one message recipient by
name and language. A maximum of 10 recipients can be defined.
By default, each recipient receives all available message types from the inverter.
In the following sections, the specific messages/notifications, which can be sent by the inverter,
are described in more detail.
Illustration 6.19: Recipient
Item
Description
Recipient id A preconfigured alias, the name can be changed.
Recipient alias An alias to be used as a name/reference for the recipient.
SMS The mobile number of the recipient, including international country code.
E-mail The e-mail address of the recipient.
Language Defines the language in which the recipient wants to receive the message.
Time Specifies the time of day when the recipient wants to receive the notification. This
does not apply to event messages as they are sent according to the threshold speci-
fied in [Messaging → Event].
Test setup Tests the current recipient. If both e-mail and text messages (SMS) have been con-
figured, a test e-mail as well as a text message (SMS) will be sent.
Note:
Before the master inverter can send SMS messages, a GSM modem together with a valid SIM
card must have been installed and configured. Refer to the GSM Manual.
Note:
Before the master inverter can send out e-mail, a valid GSM modem and SIM card must have
been installed in the inverter, or the master inverter must be connected to the internet. If
the master inverter is placed behind a network router, the router must open SMTP port 25.
Remember to configure the e-mail settings in plant view [Setup → Communication → SMTP].
For further details refer to the section SMTP Setup .
6. Setup
L00410583-01_02 43
6