User manual

6.2.6.
Data Warehouse
[0] [Plant]
/ FTP Server Upload
Illustration 6.8: Data Warehouse
Item
Description
Upload time
[0]
Time of day when the upload takes place, only used when upload interval is
configured to 'daily'.
Upload interval
[0]
Hourly
Daily
Weekly
Monthly
Disabled
FTP server address
[1]
The FTP server address is user configurable. It can be a name or IP address.
A maximum of 24 characters can be entered.
FTP server port
[1]
FTP server port is user configurable.
Default port is 21
FTP mode
[1]
FTP connection mode is user configurable. The following options exists:
- Passive
- Active
Default mode is “Active”
FTP server user name
[0]
Both the user name and the password for the FTP session (web portal upload)
established by the TLX CN Pro+ inverter can be configured by the user.
If empty, the serial number of the inverter is used. A maximum of 24 charac-
ters can be entered.
Password
[0]
The password for the FTP/web portal account. A maximum of 24 characters
can be entered.
Start log upload now
[0]
Tests the FTP upload immediately. To check status go to [Plant → Status →
Upload status]
Note:
A prerequisite for a successful data transfer to the data warehouse is a valid and active por-
tal account. Receive further details directly from the data warehouse/web portal provider.
When registering the inverter at a data warehouse/web portal provider, they often need the se-
rial number of the inverter which sends the data to the portal; in this case it is the serial num-
ber of the master inverter. The serial number of the inverter can be found via [Status → Inver-
ter] or on the name plate on the side of the inverter. Use the last 10 digits.
6. Setup
34 L00410583-01_02
6