User manual

This menu is visible when the master inverter is equipped with a GSM modem and a valid SIM
card.
Illustration 6.6: GPRS Setup for GSM networking
Note:
In order for messaging or DW upload (FTP server upload) via GSM to work it is essential that
the GPRS setup has been configured correctly.
Item
Description
SIM pin
code
Here the SIM PIN code is entered, if applicable.
The PIN code can consist of 4-8 characters.
Access
point name
Connection information from the GPRS service provider.
This information together with a user name and password can be requested by the SIM card
supplier and is needed in order for the inverter to be able to dial in to the internet. Max. 24
characters.
User name User name assigned by the GPRS service provider.
Max. 24 characters.
Password Password assigned by the GPRS service provider. For security reasons, every password char-
acter is displayed as an asterisk (*).
Password
again
Retype the password
Network
roaming
Checked (Enabled)
Not checked (Disabled)
Per default the network roaming check box is not checked.
If checked, the GPRS modem is allowed to connect to the internet via a network which is not
the home network (a network which does not belong to the network of the telephone compa-
ny). Roaming is not a free service and the telephone company will most likely impose extra
charges.
6.2.5.
SMTP Setup
[0] [Plant]
In the SMTP setup menu, the mail-server settings for exchanging e-mails are specified. Parame-
ters here include SMTP server, logon, password, sender address, and authentication type.
6. Setup
32 L00410583-01_02
6