User manual

Illustration 6.2: PV Array
Item Unit Description
PV1 array area
m
2
Input 1 - total PV array area
PV1 array power W Input 1 - total rated output of PV panels
PV2 array area
m
2
Input 2 - total PV array area
PV2 array power W Input 2 - total rated output of PV panels
PV3 array area
m
2
Input 3 - total PV array area
PV3 array power W Input 3 - total rated output of PV panels
6.1.3.
Environment
[0] [Plant, Inverter]
Via the environment menu in plant view, the values for total reimbursement and total CO
2
emis-
sion can be configured.
Illustration 6.3: Calculation Values
Item
Unit Description
Start value for yield count kWh Defines the value (an offset) from where the yield
count used in the calculation of reimbursement and
CO
2
emission begins.
Reimbursement ct/kWh Euro cent per KWh Defines a value for the financial yield.
Note: Defining this value requires considerable knowl-
edge of the individual reimbursement models of the
different countries. The default value is 0.00.
CO
2
emissions factor CO
2
/kg Allows the conversion of yield/kWh. This calculation
factor for CO
2
saving depends on the energy source to
power generation ratio. Per default it is set to 0.5 C0
2
/
kg. Ask the local electricity provider for an exact value.
6. Setup
L00410583-01_02 29
6