User manual

4. Status

4.1. Status

All values displayed in the Status are read-only. To change the inverter settings, see the

Setup

section. For a detailed description of the individual settings, refer to the TripleLynx CN Refer-

ence Manual.

As the values are requested live from the inverter, short delays may occur in retrieving data.

Fetch the newest inverter data by pressing the 'Reload' button.

4.2.

Ambient Conditions

[0] [Inverter]

If external sensors are connected to the inverter, their current values are displayed here.

Illustration 4.1: Ambient Conditions

4.3.

Photovoltaic

[0] [Inverter]

In the photovoltaic status, menu all status information and settings related to the PV side of the

inverter are displayed.

4.3.1.

PV Present Values

[0] [Inverter]

The voltage, current and power detected on each PV input are displayed here.

4.3.2.

PV Maximum Values

[0] [Inverter]

The maximum values of voltage, current and power recorded on each PV input are displayed

here.

The maximum values can be reset via [Inverter view → Setup → Inverter details → Reset max.

values].

4.3.3.

PV Input Energy

[0] [Inverter]

The total daily energy produced by all three PV inputs as a sum and by each PV input individu-

ally are shown.

Note:

If two inputs are running in parallel configuration, only one value will be shown.

4. Status

20 L00410583-01_02