User manual

Illustration 2.7: Step 6 of 7: Replication

Step 7 of 7: Inverter startup

The inverter will start automatically when the installation sequence is complete (see the

TripleLynx CN Installation Manual), and solar radiation is sufficient.

The startup sequence, including self-test, takes a few minutes.

Illustration 2.8: Step 7 of 7: Inverter startup

To change the setup later, access the inverter via the integrated web interface or the display, at

inverter level.

•

To change the name of the inverter, go to [Setup → Inverter details]

•

To enable master mode, go to [Setup → Inverter details]

2. Getting Started

12 L00410583-01_02