Technical data

Illustration 9.5: Step 4 of 7: Installed Power

To change the installed power, refer to

Setup, Calibration, PV Array

Step 5 of 7: Grid code

Select the grid code to match the location of the installation. To meet medium-voltage grid re-

quirements select a grid code ending in MV.

• The default setting is [undefined].

Select the grid code again, to confirm.

• The setting is activated immediately.

Correct selection is essential to comply with local and national standards.

Illustration 9.6: Step 5 of 7: Grid Code

9. Web Server Quick Guide

L00410582-01_02 79