Technical data

• Thin shielded cable (cable shield is folded back over the jacket)

• Thick shielded cable (> approx. 7 mm)

• Unshielded cable (alarm output)

4. Fasten the cable clamp screw to secure it and check that the cable shield is

mechanically fixed.

5. Fasten the cable gland cap.

Terminal block:

1. Strip off insulation from the wires (approx. 6-7 mm).

2. Insert the wires in the terminal block and fasten the screws to secure them

properly.

Illustration 7.6: Thin Shielded Cable (cable shield

is folded back over the jacket)

Illustration 7.7: Thick Shielded Cable (> approx.

7 mm)

Illustration 7.8: Unshielded Cable (Alarm Output)

7.3.

Sensor Inputs

7.3.1. Temperature Sensor

Three temperature inputs are provided.

7. Connection of Peripheral Units

56 L00410582-01_02