Datasheet

Data Sheet SONOMETER
TM
2000 – Ultrasonic heat meter
Loop Sequence Window 1 Window 2 Window 3
“4”
Pulse input
loop
4.1 Pulse input ‚In1’ Pulse input counter 1 Pulse value 1
4.2 Pulse input ‚In2’ Pulse input counter 2 Pulse value 2
4.3 [off] Accounting date 1 Pulse input ‚In1’ Acc.date 1 Pulse value 1
4.4 [off] Accounting date 1 Pulse input ‚In2’ Acc.date 1 Pulse value 2
4.5 [off]
Accounting date 1
previous year
Pulse input ‚In1’
Acc.date 1 previous year
Pulse value 1
4.6 [off]
Accounting date 1
previous year
Pulse input ‚In2’
Acc.date 1 previous year
Pulse value 2
4.7 [off] Accounting date 2 Pulse input ‚In1’ Acc.date 2 Pulse value 1
4.8 [off] Accounting date 2 Pulse input ‚In2’ Acc.date 2 Pulse value 2
4.9 [off]
Accounting date 2
previous year
Pulse input ‚In1’
Acc.date 2 previous year
Pulse value 1
4.10 [off]
Accounting date 2
previous year
Pulse input ‚In2’
Acc.date 2 previous year
Pulse value 2
Loop Sequence Window 1 Window 2 Window 3
“5”
Tariff loop
5.1 [off] Tariff energy 1 Tariff function 1 (e.g. ‚t 01’) Limit tariff 1
5.2 [off] Tariff energy 2 Tariff function 2 (e.g. ‚t 02’) Limit tariff 2
5.3 [off] Accounting date 1 Accounting date 1 tariff energy 1 ‚Accd 1’
5.4 [off] Accounting date 1 Accounting date 1 tariff energy 2 ‚Accd 1’
5.5 [off]
Accounting date 1
previous year
Accounting date 1 tariff energy 1 ‚Accd 1’
5.6 [off]
Accounting date 1
previous year
Accounting date 1 tariff energy 2 ‚Accd 1’
5.7 [off]
Accounting date 2
tariff energy 1
Accounting date 2 tariff energy 1 ‚Accd 2’
5.8 [off] Accounting date 2 Accounting date 2 tariff energy 2 ‚Accd 2’
5.9 [off]
Accounting date 2
previous year
Accounting date 2 tariff energy 2 ‚Accd 2’
5.10 [off]
Accounting date 2
previous year
Accounting date 2 tariff energy 2 ‚Accd 2’
Loop Sequence Window 1 Window 2 Window 3 [off] Window 4 [off] Window 5 Window 6 Window 7
“6”
Monthly
value
loop
6.1 Last month Energy Tariff energy 1 Tariff energy 2 Volume Max. flow rate Max. power
6.2 Month –1 Energy Tariff energy 1 Tariff energy 2 Volume Max. flow rate Max. power
6.3 Month -2 Energy Tariff energy 1 Tariff energy 2 Volume Max. flow rate Max. power
...
6.24 Month -23 Energy Tariff energy 1 Tariff energy 2 Volume Max. flow rate Max. power
[off] = not active
Simple operation
A push-button mounted on the front of the
calculator is used to switch to the various
displays. The button can be pressed for a short
or long time. A short press of the button ( < 3
seconds) switches to the next display within a
loop and a long press ( > 3 seconds) switches
to the next display loop. The “Energy” window
(sequence 1.1) in the main loop is the basic
display.
The calculator switches automatically to power
save mode if the button is not pressed for
approx. 4 minutes and returns to the basic
display when the button is pressed again. The
loop settings can be programmed to suit the
customer’s individual requirements using the
HYDRO-SET software.
12
DH-SMT/PL
VD.SH.A3.02 © Danfoss 08/2009