Datasheet

Data Sheet SONOMETER
TM
2000 – Ultrasonic heat meter
Informative Displays (Standard)
Loop Sequence Window 1 Window 2 Window 3 Window 4
“1”
Main loop
1.1 Accumulated Energy
1.2 Volume
1.3 Flow
1.4 Power
1.5 Supply temperature Return temperature
1.6 Difference temperature
1.7 Operating hours
1.8 [off] Monthly peak power Date
1.9 Error code
1.10 Display test
1.11 [off] Tariff energy 1
1.12 [off] Tariff energy 2
1.13 [off] Pulse input ‘In 1’ Pulse input counter 1
1.14[off] Pulse input ‘In 2’ Pulse input counter 2
1.15 Leakage detection error Leakage detection heating
1.16 Accounting date last time Accounting date last time
Accounting value Energy
last time
Accounting value Volume
last time
1.17
Accounting date next to
last time
Accounting date next to
last time
Accounting value Energy
next to last time
Accounting value Volume
next to last time
1.18 Secondary address Secondary M-Bus address
1.19 Actual maximal flow Date actual maximal flow
Loop Sequence Window 1 Window 2 Window 3 Window 4 Window 5 Window 6 Window 7 Window 8 Window 9 Window 10
“1”
Main loop
1.20 LOG
Date of
last month
Energy
Tariff
energy 1
Tariff
energy 2
Volume Max. flow
Max.
power
Impulse
counter 1
Impulse
counter 2
Loop Sequence Window 1 Window 2 Window 3 [off] Window 4
“2”
Accounting
date loop
2.1 Accounting date 1 Accounting date 1 energy Accounting date 1 volume ‚Accd 1’
2.2
Accounting date 1
previous year
Accounting date 1
previous year energy
Accounting date 1
previous year volume
‚Accd 1’
2.3 Accounting date ‚Accd 1’
Accounting date 1 in the
future
2.4 Accounting date 2 Accounting date 2 energy Accounting date 2 volume ‚Accd 2’
2.5
Accounting date 2
previous year
Accounting date 2
previous year energy
Accounting date 2
previous year volume
‚Accd 2’
2.6 Accounting date ‚Accd 2’
Accounting date 2 in the
future
Loop Sequence Window 1 Window 2
„3“
Info loop
3.1 Current date
3.2 ‚SEC_Adr’ Secondary address M-Bus
3.3 ‚Pri_Adr’ Primary address M-Bus
3.4
‚ Pt 100 r’ or ‚ Pt 500 r’ shows
installation “forward or return”
3.5 Monthly peak flow rate Date max. flow rate
3.6 Monthly peak power Date max. power
3.7 Integration interval (maximum value)
3.8 Number of error day’s
3.9 Pulse output ‚Out 1’ Pulse value and unit pulse output 1
3.10 Pulse output ‚Out 2’ Pulse value and unit pulse output 2
3.11 Pulse output ‚Out 3’ Pulse value interface pulse
3.12 Software version
[off] = not active
11
DH-SMT/PL
VD.SH.A3.02 © Danfoss 08/2009