Datasheet

ManualsBrandsDanfoss ManualsOtherSonometer 1000

Data sheet

SONOMETER

1000

Ultrasonic compact heat meter

Description/Application

MID examination certiﬁcate

no. : DE-07-MI004-PTB021

The SONOMETER™1000 is an ultrasonic static

compact heat meter especially designed for

heating, cooling or combined heating/cooling

application in local and district heating systems.

The SONOMETER™1000 as a compact heat meter

consists of the following components:

- Ultrasonic ﬂow sensor;

- Calculator with integral hardware and software

for measuring ﬂow rate, temperature and

energy consumption;

- Temperature sensors.

Features

- 1st. approval in Europe for ultrasonic heat

meter with dynamic range of q

1 : 250 in

class 2 (q

1.5 / 2.5 / 6 / 10 / 15 / 25 / 40 / 60 m³/h)

- Complete dynamic range: ≥ 1 : 1500

- Lithium battery, 230 V AC or 24 V AC mains

unit

- Battery lifetime 12 years (16 years optional)

- Patented free- beam principle

- Improved service-friendly heat meter design

- Housings with thread and ﬂange (PN 16 / 25)

- Can be conﬁgured for heating, cooling or

combined heating/cooling application

- Temperature range: 5 - 130 / 150 °C

- Overload temperature up to 150 °C

= 0.6 - 2.5 m

/h)

- Swirl-free ﬂow around reﬂector

- New construction - lower pressure loss

- Robust stainless steel reﬂector

- Available in nominal sizes

0.6 / 1.0 / 1.5 / 2.5 / 3.5 / 6 / 10 / 15 / 25 / 40 /

60 m³/h

- Measuring accuracy meets the requirements

of EN 1434 ( MID) class 2 and 3

- No calming sections necessary in the inlet

and/or outlet (standard installation)

Special Features

- Power save mode

- NOWA test capability

- Remote reading via M-Bus, RS 232, Radio or

optical interface

- Optional Plug & Play modules

- Individual tariﬀ functions

- History memory for 24 months

- Extensive diagnostic displays

- HYDRO-SET parameterization software

on Windows basis guarantees optimum

adaptation to the user’s speciﬁc needs

DEN -SMT/PL

Summary of content (12 pages)

PAGE 1
Data sheet SONOMETERTM1000 Ultrasonic compact heat meter Description/Application The SONOMETER™1000 is an ultrasonic static compact heat meter especially designed for heating, cooling or combined heating/cooling application in local and district heating systems. MID examination certificate no.
PAGE 2
SONOMETERTM1000 – Ultrasonic heat meter Data Sheet Ordering AAA BB - C D E - AAA - application energy meter for heating energy meter for cooling energy meter for heating/cooling 1HE 1CO 1HC BB - flow sensor qp 0.6 m³/h / 110 mm thread / DN 15 / G¾B qp 0.6 m³/h / 130 mm thread / DN 20 / G1B qp 0.6 m³/h / 190 mm thread / DN 20 / G1B qp 1.0 m³/h / 110 mm thread / DN 15 / G¾B qp 1.0 m³/h / 130 mm thread / DN 20 / G1B qp 1.0 m³/h / 190 mm thread / DN 20 / G1B qp 1.5 m³/h / 110 mm thread / DN 15 / G¾B qp 1.
PAGE 3
Data Sheet SONOMETERTM1000 – Ultrasonic heat meter Ordering continued Modules Communication Function Supply voltage Code No.
PAGE 4
SONOMETERTM1000 – Ultrasonic heat meter Data Sheet Technical data Flow rate ranges Nominal qp m3/h 0.6 1.0 / 1.5 2.5 3.5 6 10 15 25 40 60 Maximum qs m3/h 1.2 2/3 5 7 12 20 30 50 80 120 Minimum qi l/h 6 10 / 6 10 35 24 401) / 100 601) / 150 250 160 2401) /6002)/ 1200 1 2.
PAGE 5
Data Sheet SONOMETERTM1000 – Ultrasonic heat meter Design and function The SONOMETER™1000 as a compact heat meter consists of the following components: - Ultrasonic flow sensor; - Calculator with integral hardware and software for measuring flow rate, temperature and energy consumption; - Temperature sensors. Calculator The calculator contains all the necessary circuits for recording the flow rate and temperature and for calculating, logging and displaying the data.
PAGE 6
Data Sheet SONOMETERTM1000 – Ultrasonic heat meter Design and function, continued Log Memory The log memory is used to store consumption values. The storage frequency can be selected from various storage intervals (1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60 minutes or the default setting of 24 hours). The data saved in the log memory can be used for the following analyses: - Reading the calculator on a certain day. Example: If the day for reading is 01.
PAGE 7
Data Sheet SONOMETERTM1000 – Ultrasonic heat meter Overview of Loops 7 VD.SH.B4.
PAGE 8
SONOMETERTM1000 – Ultrasonic heat meter Data Sheet Informative Displays (Standard) Loop “1” Main loop Loop Sequence 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 [off] 1.9 1.10 1.11 [off] 1.12 [off] 1.13 [off] 1.14 [off] Sequence 2.1 3.
PAGE 9
SONOMETERTM1000 – Ultrasonic heat meter Data Sheet Loop “5” Tariff loop Loop “6” Monthly value loop Sequence Window 1 5.1 [off] Tariff energy 1 5.2 [off] Tariff energy 2 5.3 [off] Accounting date 1 5.4 [off] Accounting date 1 Accounting date 1 5.5 [off] previous year Accounting date 1 5.6 [off] previous year Accounting date 2 5.7 [off] tariff energy 1 5.8 [off] Accounting date 2 Accounting date 2 5.9 [off] previous year Accounting date 2 5.10 [off] previous year Window 2 Window 3 Tariff function 1 (e.
PAGE 10
Data Sheet SONOMETERTM1000 – Ultrasonic heat meter Mounting Depending on the design, the heat meter is installed either in the supply or return line as indicated on the data plate. The heat meter is to be installed so that the direction of flow corresponds to the direction of the arrow on the flow sensor. Ensure that the flow sensor is always filled with liquid on completion of installation. Straight inlet/outlet pipes (calming sections) are not required for the flow sensor.
PAGE 11
SONOMETERTM1000 – Ultrasonic heat meter Data Sheet Dimensions Nominal size qp = 0.6 m³/h L [mm] 110 130 L1 [mm] 190 230 190 qp = 1.0 / 1.5 m³/h 190 110 130 190 230 190 qp = 3.5 m³/h qp = 2.
PAGE 12
Data Sheet SONOMETERTM1000 – Ultrasonic heat meter Dimensions, continued Temperature sensors Designation Type Dimension D (mm) L (mm) Direct mounted Pt 500 ø 5.2 45 ø 5.2 45 ø 6.0 50 Pocket sensor Pt 500 Sensor pockets Type Sensor dimension Brass (mm) Stainless steel ø 5.2 ø 6.0 ø 6.0 L1 (mm) 47 60 93 128 47 92 128 98 133 168 223 L (mm) 35 52 85 120 40 85 120 85 120 155 210 Length 12 VD.SH.B4.