Installation Guide

AN383426363919en-000101 | 4

PXE 04: Baseplate layout

PXE 04: Mounting instructions

Fig. 05

Fig. 06

A – Type SKINTOP MULTI Version 1 – Maximum number of cables – 22 including 6x8-12 mm; 16x3-7 mm

B – Type SKINTOP MULTI Version 5 with SKINTOP BRUSH ADD-ON 24 for EMC screen contact -

Maximum number of cables – 27 including 27x4-8 mm

C - Type SKINTOP ST-M M20 - GDA Sensor Cable

Note:

1. To ensure an optimum strain relief, the cable bundle can be ﬁxed with help of a cable tie

2. After removing unused cable from SKINTOP MULTI - elastic gel will NOT SEAL, please use silicone to ensure proper

IP (Ingress Protection)

3. Use plug for M20 gas detector gland if gas detector is not present.

NB:

DIFFERENT POTENTIALS 24 V AND 230 V SHOULD BE PLACED IN SEPARATE CABLE ENTRY

BBA A