User Guide

7. Prosa mandatory settings This section is to highlight the fundamental importance of the STEP 7 listed in Section 6.
The association between the equipment and the PR-OCTO can be done:
•
Using the mobile app
• With the Alsense Portal
• or other modalities previously agreed with Danfoss (contact via e-mail: [e-mail]).
The association must be done before to ship the equipment to the final customer. Any shipment
to the final customer must be notified with an e-mail containing the equipment codes and the
customer's warehouse address to
[e-mail].
The techincal specification can be found on the following datasheets:
•
PR-OCTO
• PR-OCTO Lean
Fig. 8: Association between OCTO device and the specific cooler.
8. Technical specification
9. Dimensions
Fig. 9: Left and right view
Danfoss
80G8254
143
+0.25
34
+0.25
User Guide | Monitoring unit, type PR-OCTO
8 | BC391624209008en-000201 © Danfoss | Climate Solutions | 2022.04