User Guide

User Guide | Monitoring unit, type PR-OCTO

Fig. 2: Side B

Table 1: LED operation details

RED LED OFF The device is not correctly powered.

RED LED blinking The device is powered and the communication with the electronic thermostat is not

established yet.

RED LED ON The device is powered and the communication with the electronic thermostat is

correctly established.

RED LED fast blinking The device is powered while the communication with the electronic thermostat has

been interrupted.

GREEN LED OFF The modem is not running

GREEN LED fast blinking The modem is not registered to the network

GREEN LED blinking The modem is registered to the network

The PR-OCTO device gives the possibility to execute the lock command and to collect the diagnostic

information only in conjunction with an electronic thermostat.

The current version of the PR-OCTO includes the compatibility with the thermostats listed in Table 2.

3. Compatibility

Table 2: Compatible electronic thermostats

Manufacturer Models

Danfoss ERC111, ERC112, EETa

Eliwell EWPLUS400, EWPLUS961, EWPLUS974, EWPLUS974 Smart, EWPLUS978

Carel PJP4C0HG00 (PYUG3R05R3, PYKM1Z051P), PZPU family (es. PZPUCOMB03K, PZPUCOMB06K),

PYHB1R055S (PYFZ1Z056M), PZHBC0H00V, PYHB1R057F (PYHB1R05E9), PJP7C0HG00

Danfoss

80G8252

COMM connector: the TTL communication port

with the electronic thermostat. This is also the

connector for the temperature probe inputs.

Power supply connector: 100 – 240 V ~

Optional connector: the RS485/RS232

communication port for suitable thermostat.