User's Guide

10. Warnings

The installation of the OCTO has to be performed only and exclusively by qualiﬁed and skilled

technicians.

The installation of the OCTO should be performed while the cooler is switched-oﬀ.

Inside the device there is a GPRS antenna. For this reason, while the OCTO is working it must

be at the minimum distance of 9.5 cm (4”) from the people. The installation must be done

to ensure this distance.

The OCTO has to be installed in a protected position. The OCTO has to be embedded in the

cooler and not accessible. In case of installation on the back side of the cooler, the OCTO has

to be protected with an additional box to protect people from electric shock.

If the power supply cable of the OCTO is not double insulated, it has to be physically separated

from the COMM cable (the communication cable with the thermostat).

The OCTO input power supply is protected by over-currents by the F002 device, with this

characteristics: delayed fuse 250 V 400 mA.

Any document related to the conformity declaration of the OCTO can be downloaded from

www.prosa.com.

This equipment is not suitable for use in locations where children are likely to be present.

Cet équipement ne convient pas à une utilisation dans des lieux où des enfants sont

susceptibles d'être présents.

ADAP-KOOL®