Operating Guide NovoCon® L/XL / 73690670 NovoCon® L/XL NovoCon® L / SU / SD NovoCon® L / SU / SD AB-QM DN 125 - 150HF NovoCon® XL MAINTENANCE FREE NovoCon® L © Danfoss | 2021.
NovoCon® L/XL ❶ DN 125 - 250 NO presetting! – + 100 % ❷ = AUTO = ① 13 mm 4 mm ③ ④ 2× 2× ② 12-15 Nm 2× ① ③ ④ 2× 2× 12-15 Nm 2× ② ❸ NovoCon® L = ① AUTO = 3,5 - 4,5 mm × 0,7mm 4 mm T 10 ② 3-5 Nm ③ 2× 2 | © Danfoss | 2021.
NovoCon® L/XL NovoCon® L SD ④ ⑦ ⑤ ③ 1× ① 3-5 Nm ⑥ 2× ② NovoCon® L SU ⑨ 1× ⑥ ③ ① ④ ② ⑧ ⑤ 3-5 Nm ⑦ 2× AQ321852892717en-010302 © Danfoss | 2021.
NovoCon® L/XL ❹ NovoCon® XL = AUTO = HN 10 5 mm ⑥ ② ① ③ ⑦ ④ ⑧ ⑤ ⑨ 3-5 Nm 2× ⑬ ⑫ 40 Nm 1× HH10 ⑭ ⑩ ❺ ⑮ ⑪ NovoCon® XL 4 | © Danfoss | 2021.
NovoCon® L/XL ❻ = AUTO = 3,5–4,5 mm × 0,7 mm ② ① T 10 0,7-1,1 Nm 2× ③ M16 M20 ⑤ M16, M20 / MP16 1/2’’ ④ M16 1/2’’ ⑦ MODE: Normal Calibration Flush De-Air ⑥ ❼ GND is common for all signals ❽ Optional step (connecting flow sensor) T1 Temperature sensor 1 T2 24 V AC/DC BACnet MODBUS GND is common for all signals AQ321852892717en-010302 Temperature sensor 2 SONO 3500 CT ANALOG OUTPUT ANALOG INPUT Terminal Nr.
NovoCon® L/XL ❾ NovoCon® L 003Z8560 E100 VXX 01 281624 0030471 Actuator for AB-QM DN125-150 Control signal: BACnet MS/TP, Modbus RTU, 0-10V, 0-20mA Serial number and QR code can be removed from the NovoCon® L/XL label and added to installation drawing. 6430 Nordborg, Denmark MADE IN SLOVENIA Power: 24VAC/DC, 50/60 Hz, Operating 9.6 VA Force: 2000N. Stroke: 50 mm. Speed: 3-24s/m.
NovoCon® L/XL ⓬ Safety Note To avoid injury and damage to persons and devices, it is absolutely necessary these instructions are carefully read and observed prior to assembly and commissioning. Necessary assembly, start-up, and maintenance work must be performed only by qualified, trained and authorised personnel. Switch off the pump and the power line before mounting and wiring the actuator. Safety Note Connect via safety isolating transformer.
NovoCon® L/XL Part Name Motor Hazardous Substances Table Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) X O O O O O O: Indicates that this hazardous substance contained in all of the homogeneous material for this part is below the limit requirement in GB/T 26572; X: Indicates that this hazardous substance contained in at least one of the homogeneous material for this part is above the limit requirement in GB
