Installation and User Guide living eco® Electronic Radiator Thermostat Danfoss Heating Solutions VIIDB202 09/2013 1
Installation Guide living eco® Electronic Radiator Thermostat Installation Guide 1. Installation 1.1 Identify your living eco® thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.2 In the package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.3 Overview of valve adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Guide living eco® Electronic Radiator Thermostat User Guide 3. Display and menus 3.1 Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Programme menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Function menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Guide living eco® Electronic Radiator Thermostat 1. Installation 1.1 Identify your living eco® thermostat LIVING ECO living eco® comes in several versions to meet the demands of different markets. You identify your version by the code number on the box label. Adapters for a range of different valves types are available as accessories, see chapter 1.3. Code no.
Installation Guide living eco® Electronic Radiator Thermostat 1.3 Overview of valve adapters Adapters for a wide range of different valve types are available as accessories. Adapter type Code no. For Danfoss RA valves 014G0251 For M30 x 1.
Installation Guide living eco® Electronic Radiator Thermostat 1.4 Installing the right adapter Adapter for RA valves (pre-mounted on 014G0050) 1. 2. Place the RA adapter on the valve as shown. Tighten the adapter with the 2 mm Allen key. Adapter for M30 x 1.5 (K) valves 1. 2. Place the K adapter on the valve as shown. Hand-tighten the K adapter (max. 5 Nm). Adapter for RAV valves (accessory) 1. 2. Click the inner adapter on the valve. Hand-tighten the outer adapter (max. 5 Nm).
Installation Guide living eco® Electronic Radiator Thermostat Adapter for RTD valves (accessory) 1. 2. Place the RTD adapter on the valve as shown. Hand-tighten the RTD adapter (max. 5 Nm). Adapters for M28 valves (accessories) Please follow the instructions supplied with the valve adapter for the specific M28 valve. 1.5 Inserting the batteries Remove the battery cover and insert two AA batteries. Make sure the batteries are correctly oriented. Rechargeable batteries must not be used.
Installation Guide living eco® Electronic Radiator Thermostat 1.7 Setting time and date for the first time 1. 2. When the batteries are installed the time flashes on the display - 23:59. a. Set hours with , press to confirm. b. Set minutes with , press to confirm. c. Set date with , press to confirm. When flashes, press to confirm your settings. The display now switches to the Home Screen (see chapter 3.1). 1.8 Installing living eco® 8 1. 2.
Installation Guide living eco® Electronic Radiator Thermostat 1.9 Automatic adjustments When living eco® is installed it will automatically begin to adjust itself to your heating system. During this process you might experience that the thermostat reacts slowly or turns the heat up and down by itself. This is normal and a necessary part of the adjustment process. 1.
Installation Guide living eco® Electronic Radiator Thermostat 1.11 Resetting living eco® to default settings 1. 2. Remove the battery cover and take out one battery. Press and hold for approx. 5 seconds, while reinserting the battery. 1.12 Removing an adapter from living eco® 10 1. 2. Remove the battery cover. Insert a small hex key or similar into the locking hole to lock the adapter ring. 3. 4. With the hex key locking the adapter ring, turn the adapter in the shown direction.
Installation Guide living eco® Electronic Radiator Thermostat 2. Technical specifications Thermostat type Programmable electronic radiator valve controller Recommended use Residential (pollution degree 2) Actuator Electromechanical Display Grey digital with backlight Software classification A Control PID Power supply 2 x 1.5 V alkaline AA batteries Power consumption 3 μW in standby 1.2 W when active Battery life 2 years Low batteri signal Battery icon will flash in display.
User Guide living eco® Electronic Radiator Thermostat 3. Display and menus 3.1 Home Screen When pressing of living eco®: the Home Screen appears with basic information on programming and operation Time is shown with the dashed circle, each segment representing 30 minutes. • Black segments = periods with comfort temperature. • White segments = periods with setback temperature. • Flashing segment = current time.
User Guide living eco® Electronic Radiator Thermostat Display symbols in the Programme menu P0 Programme without automatic temperature reduction. This programme maintains the temperature constant all day and night. P1 Saving programme which as default lowers the temperature to 17 °C at night (22:30 06:00 hrs). Time and temperature are configurable.
User Guide living eco® Electronic Radiator Thermostat 3.4 Advanced menu 1. 2 To select the Advanced menu: If the display is off, press , then press and hold for 3 seconds to open the Function menu. Press both buttons for 3 seconds to open the Advanced menu. Display symbols in the Advanced menu Back. Confirm selection. Low battery symbol. Period setting for the Travel programme. Deactivate/activate automatic daylight saving time - see chapter 5.3.
User Guide living eco® Electronic Radiator Thermostat 4. Temperature and programme settings 4.1 Setting the comfort temperature 1. 2. If the display is off, press . Use the buttons to raise or lower the comfort temperature (default temperature 21 ° C). living eco® will remember the new comfort temperature after the setback periods. If the temperature is changed during a setback period (default 17 ° C), the new temperature will only be valid for this setback period.
User Guide living eco® Electronic Radiator Thermostat 4.2 Default programme settings Programme P0 This programme is without automatic temperature reduction. It will maintain the temperature at a constant comfort level all day and night. The default comfort temperature is 21 °C, but can be adjusted to any level between 6 and 28 °C.
User Guide living eco® Electronic Radiator Thermostat 4.3 Adjusting a setback period 1. 2. If the display is off, press , then press again to open the programme menu. Use to select the desired programme. When the chosen programme is flashing, press to confirm. Use to select the desired period - choose between the weekend, all weekdays or a single day. When the chosen day(s) flashes, press to select. 3. 4. Start time for the setback period is flashing slowly.
User Guide living eco® Electronic Radiator Thermostat 4.4 Creating a new setback period living eco® allows you to create up to three setback periods for each day. 18 1. 2. If the display is off, press , then press again to open the programme menu. Use to select the desired programme. When the chosen programme is flashing, press to confirm. Use to select the desired period - choose between the weekend, all weekdays or a single day. When the chosen day(s) flashes, press to select. 3. 4.
User Guide living eco® Electronic Radiator Thermostat 4.5 Deleting a setback period 1. 2. If the display is off, press , then press again to open the programme menu. Use to select the desired programme. When the chosen programme is flashing, press to confirm. Use to select the desired day(s), press to confirm the selection. 3. 4. Start time for the setback period is flashing slowly. Press , the start time flashes faster. Use to set start time to half an hour before stop time.
User Guide living eco® Electronic Radiator Thermostat 4.6 Creating a Travel programme A Travel programme keeps the setback temperature for a period, defined by you. Use a Travel programme to save energy, when you are away from home. 20 1. 2. If the display is off, press , then press again to open the programme menu. Use to select . When the suitcase symbol flashes, press to confirm. The current day is flashing. Use to set the day of departure, press to confirm. Now the current month is flashing.
User Guide living eco® Electronic Radiator Thermostat 4.7 Overrule a Travel programme (early return) If returning earlier than expected you might wish to shift from the Travel programme to your normal programme. 1. 2. If the display is off, press . The display will show: , set Travel period and the setback temperature. Press again to open the programme menu. Use to select the usual programme P0, P1 or P2, press to confirm. 4.8 Changing an existing Travel programme 1. 2.
User Guide living eco® Electronic Radiator Thermostat 4.9 Deleting a Travel programme 1. 2. If the display is off, press , then press again to open the programme menu. Use to select , press to confirm. Use to select OFF, press to confirm. 4.10 Creating a Frost Protection programme The frost protection programme keeps the setback temperature until another programme is selected. 22 1. 2. If the display is off, press , then press again to open the programme menu. Use to select .
User Guide living eco® Electronic Radiator Thermostat 5. Additional settings 5.1 Setting the time 1. 2. If the display is off, press , then press again and hold for 3 seconds. Use to select , press to confirm. Hours flashes, use to set and press to confirm. Then Minutes flashes, use to set and press to confirm. 3. 4. Date flashes, use to set and press to confirm. Then Month flashes, use to set and press to confirm. Then Year flashes, use to set and press to confirm. flashes.
User Guide living eco® Electronic Radiator Thermostat 5.3 Deactivating automatic daylight saving time 1. 2. If the display is off, press , then press again and hold for 3 seconds. flashes. Press both buttons for 3 seconds, use to select d5 and press to confirm. 3. 4. 1 flashes, indicating automatic daylight saving time is on. Use to shift to 0, press to confirm. 0 flashes, indicating automatic daylight saving time is off. Press to confirm. 5.
User Guide living eco® Electronic Radiator Thermostat 5.5 Setting the Heating Control 1. 2. If the display is off, press , then press again and hold for 3 seconds. flashes. Press both buttons for 3 seconds, use to select Hc and press to confirm. 3. 4. 1 flashes, indicating moderate heating response is selected (recommended for district heating). Use to shift to 0, press to confirm. 0 flashes, indicating quick heating response is selected (recommended for all boilers), press to confirm. 5.
User Guide living eco® Electronic Radiator Thermostat 5.7 Adjusting to radiator/room conditions Change this setting if the radiator is over- or undersized for the room. This will help living eco® to work more efficiently. 1. 2. If the display is off, press , then press again and hold for 3 seconds. flashes. Press both buttons for 3 seconds, use to select Pb and press to confirm. 3. 4. 2 flashes, indicating the default setting.
User Guide living eco® Electronic Radiator Thermostat 5.9 Deactivating intelligent Control (Forecast) The Intelligent Control (Forecast) ensures that living eco® reaches the comfort temperature on time, according to the settings. This default function can be deactivated. 1. 2. If the display is off, press , then press again and hold for 3 seconds. flashes. Press both buttons for 3 seconds, use to select Fo and press to confirm. 3. 4. 1 flashes, indicating the Forecast is active (default setting).
Installation and User Guide living eco® Electronic Radiator Thermostat Installer Danfoss A/S Haarupvaenget 11 DK-8600 Silkeborg Denmark Phone: +45 7488 8000 Fax: +45 7488 8100 www.danfoss.com www.living.danfoss.
