installation Guide

VISGL45X © Danfoss 04/2011

Danfoss Link™ software is upgradable. New software versions is published for free download on

www. heating.danfoss.com.

Download the software upgrade to a SD Mini memory card.

Remove the front cover and press the Set-Up pin for 3 seconds.

1. Select Software. 2. Select Software Upgrade. 3. Insert memory card.

4. Select Start Upgrade. 5. Select Upgrade Software Now! 6. Select Continue.

TIP!

To avoid possible secession from the power supply, hold on top of Danfoss Link™ CC during insertion of the

memory card.

Installation Guide Danfoss Link™ CC - Upgrading software version

Upgrading

software version