Installation Guide
AN26093094481101-000401 | 3
© Danfoss | Climate Solutions | 2022.06
ENGLISH
Use only original Danfoss parts, including O-rings
and gaskets for replacement. Materials of new parts
are certied for the relevant refrigerant.
In cases of doubt, please contact Danfoss.
Drawings are only for illustration, not for
dimensioning or construction.
Danfoss accepts no responsibility for errors and
omissions. Danfoss Industrial Refrigeration reserves
the right to make changes to products and
specications without prior notice.
The following text is applicable to the UL listed
products ICS 25-65
Applicable to all common non-ammable
refrigerants, including R717 and to non-corrosive
gases / liquids dependent on sealing material
compatibility. The design pressure shall not be
less than the value outlined in Sec.9.2 of ANSI/
ASHRAE15 for the refrigerant used in the system.